home *** CD-ROM | disk | FTP | other *** search
- Path: usenet.ucs.indiana.edu!ezinfo!dfetter
- From: dfetter@ezinfo.ucs.indiana.edu (Daniel Fredrick Etter)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Mercury 040 with A3000
- Date: 8 Jan 1996 19:56:42 GMT
- Organization: Indiana University, Bloomington
- Message-ID: <4crstq$5ms@usenet.ucs.indiana.edu>
- NNTP-Posting-Host: ezinfo.ucs.indiana.edu
- X-Newsreader: TIN [version 1.2 PL2]
-
-
- You may or may not recall, or even care, that I posted a few requests
- for help with installing the aforementioned card in aforementioned
- computer. Well, I finally got it running. So, if anyone else in the
- entire world is/was trying to install one of these babies (given the
- number of responses I got, it seems doubtful, but hey--if I can help
- only one poor soul, it'll be worth it) try this:
-
- Ignore the manual's suggestion about Jumper E! Remove the jumper
- entirely! That's it! That was the problem that has bothered me for a
- couple of months.
- My system: A3000 030/25, 18M on motherboard, fully loaded 32M Merc040.
-
-
- Thank you for your time,
-
- Dan
-
-